Sim Medical Launches G&C Hybrid 9100 Dual-Mode Intraoperative Imaging System – Featured in Artery Select New Product Showcase Episode 81
As China’s population aging intensifies and the number of people engaging in physical activity continues to grow, ChinaSuffering from Orthopedic Diseasesthe number of patients continues to rise. According to surveys, in recent years, ChinaOrthopedic Surgical Volume Continues to Rise at a 15% Growth Rate. The continuously increasing number of patients places immense work pressure on orthopedic surgeons. Therefore, devices capable of improving surgical efficiency and success rates will inevitably gain high recognition from clinicians.
Jiangsu Simm High-tech Co., Ltd.Hereinafter referred to as “Simm Medical”), leveraging years of experience in innovative research and development, and through dedicated research and customer surveys, has meticulously crafted and launched“New Mobile X-ray Products”: G&C Hybrid 9100 Series Mobile X-ray Machines. Building upon the traditional simultaneous anteroposterior and lateral exposure capability of G-arm systems, this device incorporates a variable gantry. Not onlyFeatures the ability to freely switch between G and C configurations(Capable of single-plane or biplane imaging to meet diverse clinical needs),Also features seven-axis multi-angle motion, providing physicians with clearer and more precise intraoperative imaging during complex surgical procedures. Furthermore, the G&C Hybrid 9100 series features an integrated design, making the entire system more compact and lightweight.
On Tuesday, July 30, at 19:30, the 81st edition of VCBeat Select New Product Review will feature Yang Hua, Founder & CEO of Jiangsu Simm High-Tech Co., Ltd.; Wang Wei, Partner & CTO of Jiangsu Simm High-Tech Co., Ltd.; and Zhang Weibin, Partner & COO of Jiangsu Simm High-Tech Co., Ltd., who will present“China’s First Mobile X-ray System Meeting Both G-arm and C-arm Requirements—G&C Hybrid 9100 Twin-Star Integrated Intraoperative Imaging Device”Product Introduction.
The image shows Simm Medical's "G&C Hybrid 9100 Series Mobile X-ray Machine"
The productSuitable for all surgeries requiring intraoperative X-ray localization, whether it isFluoroscopy, orSpot Film Radiography, orIntraoperative AngiographyAll are applicable. For spine-related minimally invasive surgeries, it offers greater flexibility and efficiency, assisting clinicians in performing surgical procedures more effectively, thereby alleviating patient suffering to a greater extent and benefiting a larger number of patients.
Mobile C-arm X-ray Machine G&C Hybrid 9100 Series:
1. Proprietary telescopic auxiliary arm enables seamless switching between C-arm and G-arm configurations to meet diverse surgical requirements.
2. Unique seven-axis motion mode provides surgeons with better viewing angles, meeting the fluoroscopic needs of complex surgeries.
3. Proprietary one-touch bed entry mode enables lateral patient transfer and ensures compatibility with a wider range of surgical tables.
4. Low-dose mode to reduce radiation exposure for both operators and patients.
5. Integrated design with UPS power supply facilitates equipment mobility between different operating rooms.
6. Proprietary One-touch System: Better Aligned with Clinicians' Workflow, Reducing the Learning Curve.
1. G&C Hybrid 9100 Series Mobile X-ray MachineAdopts a dual-modality gantry design, building upon the traditional C-arm design, the lateral detector auxiliary arm is engineered as an electrically telescopic structure. This innovative design breaks through the conceptual limitations of conventional C-arms, eliminating drawbacks such as limited gantry motion degrees of freedom and cumbersome positioning operations, thereby significantly expanding the application scope and enhancing operational convenience of the C-arm.
2. G&C Hybrid 9100 Series Mobile X-ray MachineIntegrate the image workstation into the rack-mounted hostImage processing and visualization can be performed without the need for additional workstations, significantly reducing floor space requirements and preventing equipment overcrowding in the operating room. The integrated design allows the device to be transferred to other operating rooms in a single step. Additionally, the device is equipped with a built-in uninterruptible power supply (UPS), enabling standby transfer without shutdown.
3. G&C Hybrid 9100 Series Mobile X-ray MachineAdopts an eccentric unilateral load-bearing base design similar to that of a traditional C-arm, complemented by a telescopic auxiliary arm and a multi-dimensional motion gantry., enabling movement from the side of the operating table to the imaging position while eliminating the risk of contact between the equipment base and the operating table base, thereby facilitating more convenient and efficient initial imaging localization. The equipment also features one-touch control for patient loading and standby positions, allowing rapid adjustment of the gantry position and angle to improve work efficiency.
4. With the assistance of the G&C Hybrid 9100 series mobile X-ray machine,Physicians' surgical consumption for PKP, PVP, and other procedures reduced by approximately 30-50%. The puncture success rate was significantly improved.
Scan the QR code on the poster to add our assistant and reserve your spot for the live stream.
Yang Hua
Founder & CEO of Simm Medical
20+ Years of Experience in Medical and Surgical Equipment; Serial Entrepreneur
2013–2015 Oriental Weier, Co-Founder & Vice President of Marketing. Grew annual revenue from over RMB 2 million to over RMB 70 million; secured investments from Sequoia Capital, OrbiMed, New Hope Group, Guoke, and China General Technology (Group) Holding Co., Ltd.
2012–2013 Philips Healthcare Sales Director, North China
2002–2012 GE Healthcare Product Manager, Project Manager
1999–2002 Sales Manager, Surgical Navigation, Robotics, and Endoscopy
Wang Wei
Partner & CTO, Simm Medical
17+ years of experience in image algorithms, 10+ years of experience in system architecture and development management
2019–Present Vice President of R&D, Simm Medical
2010–2019 GE Healthcare, Systems Manager and Chief Architect of Image Processing
2007–2010 Neusoft Medical Algorithm Supervisor, responsible for the design of CT-related image processing algorithms
Zhang Weibin
Partner & COO, Simm Medical
15+ years of operational management experience; former COO of a publicly listed company and senior executive at multiple firms
2019–Present Simm Medical Vice President of Operations
2017–2019 Zhongzhi Financial Services Vice President
2015–2017 Suzhou Huanya CEO
2013–2015 Zhongke Yunchao Vice President of Operations
2005–2013 Ruidi Medical Deputy General Manager
2001–2005 Dayin Junhui Deputy General Manager
About Simm Medical
Simm Medical, established in 2013, adheres to the business philosophy of “user needs driving product development and customer satisfaction driving service excellence,” providing medical clients with comprehensive solutions and services for precise minimally invasive surgical imaging through “technology and innovation.”
The company has successively launched the D-Vision 9000 series and the G&C Hybrid 9100 series of C-arm products. These products have received widespread acclaim since their market debut. To date, Simm Medical has installed over 100 units across China. Its products have been procured by leading domestic medical institutions, including the Chinese PLA General Hospital, Peking University Third Hospital, The Third Hospital of Hebei Medical University, Xijing Hospital, Xinqiao Hospital, and The Second Affiliated Hospital of Zhejiang University School of Medicine.
In the future, the company will continue to invest in and accelerate the research and development of comprehensive solutions for surgical imaging. Focusing on clinical applications such as surgical imaging, surgical navigation, and surgical robots, we aim to create intelligent and standardized holistic solutions, thereby fulfilling our corporate mission of “leveraging technology to serve healthcare.”
“Artery Select New Product Showcase” is a live-streaming program under “Artery Select” designed to support medical enterprises in launching innovative products. The program’s mission is: to empower the milestone launch of every medical innovation product.
Method 1: Watch the Live Stream via Mini Program
Scan the QR code below to contact the assistant and schedule a live stream (if already added, please reach out to the assistant directly).
Method 2: Watch the live stream on the VCBeat app—lucky grand prizes await you!
Scan the QR code below to download the VCBeat app and register to watch the live stream.
Send a screenshot of the live stream to the assistant to enter the lucky draw for a chance to win a [15-day trial membership of VBInsight Industry Think Tank].
